Midtown White Shaker

Width 43-3/4" | Height 46-3/8" | Depth 19-7/8"

Signature style wood hood that comes with a stainless steel liner. The chimney height of 23-1/2" can be trimmed on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-11/16" and the width is 23-3/8".

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 30” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 42” | Depth 12”

Open end wall cabinet with 3 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 43-3/4" | Height 46" | Depth 19-7/8"

Artisan style wood hood that comes with a stainless steel liner. The chimney height can be trimmed up to 12" on site, if needed. Blower is not included and would need to be purchased separately. The chimney depth is 9-1/2" and the width is 23".

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a 6x30 filler (sold separately - see SKU WF630). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" filler (SKU WF630) must be ordered separately. An additional overlay or decorative filler can be installed on the 6" filler if desired (also sold separately).

Width 6" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 6" | Height 30" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.