Midtown Light Grey Shaker

Width 11-7/8" | Height 47.5" | Depth .375"

Beaded panel that has notched sections so multiple panels can be interlocked together. Beads are 1-1/2" wide, center-to-center. The exposed finished area of the panel is 11-7/8" wide but the total width of the panel is 12-7/8".

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Create a pantry behind those decorative panels with this tall filler. Available for 6 applications, this filler comes in a 39" height and can be used alone or in conjunction with others to meet your tall pullout height requirements. A beautiful addition to any kitchen; this unit features 5 adjustable shelves with chrome rails.

*Please note that you will need to order a quantity of 2 to create a tall filler application*

• 6" Tall Filler Pull-Out
• Depth: 23"
• Height: 38-1/2"
• Minimum Frameless Opening: 6-1/8"W x 23-1/4"D x 38-5/8"H
• Weight: 38 lbs
• Natural finish
• Adjustable shelves
• Comes fully assembled ready to be installed in-between cabinets
• Limited lifetime warranty
• Note: Fillers can only be installed with new cabinet construction
• Simply add own cabinet front
• Stack 2 together for taller applications (Use two for 84" tall fillers and one combined with one 432-TF45-6C for 90" fillers)
• **Filler must be ordered separately**

Width 14-1/4" | Height 19-1/4" | Depth 21-3/4"

Made from solid wood (maple) construction. Bottom Mount Pullout Waste/Trash Container. Comes with two single 35 Qt. waste bin. Durable wood base at the bottom of the cabinet to allow easy retrieval of waste bin and features full-extension ball bearing slides with pre-assembled doormount brackets.

Width 17-1/2" | Depth 21-1/4"

Minimum Trim: Width 14-3/4" | Depth 17-3/4"

Get rid of cluttered drawers with this Cutlery Tray made with rubberized polystyrene which allows easy trimming for a perfect fit in any drawer. Comes in white polymer trays.

Rack Dimensions: Width 10-1/2" | Height 8" | Depth 2-7/8"

Cutting Board: Width 7-3/4" | Height 16" | Depth 1-1/4"

Quality and durability is what you'll notice about the Door Mount Cutting Board. The maple hardwood cutting board is mineral oil treated and the support racks are coated with a UV-cured clear finish that complements match to any cabinet. Contains door rack, cutting board and screws.