Midtown White Shaker

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 5-1/2" | Height 29-3/8" | Depth

Decorative panel that can be used with a 6" filler, to be installed on a 6" spice pull-out or in place of an overlay filler. The panel will match the door style of the collectoin it's ordered (the left and right door stiles will have a reduced width). *Please note that this item is made to order and carries an extended lead time of 6-8 weeks, any items ordered with it, from the same (or matching) collection will also incur the extended lead time.*

Width 7/8" | Height 5" | Depth 7/8"

Toe kick cap made from solid wood that will match the finish of the collection. It is used to finish the exposed side of the toe kick end and will need to be cut on site, prior to installation.

Width 3" | Height 30" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**