Midtown White Shaker

Width 12" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 15" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 18" | Height 15" | Depth 12"

Wall cabinet that has 1 door and no shelves.

Width 24" | Height 15" | Depth 12"

Diagonal corner wall cabinet with no shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 22-5/8" and the door width is 14-3/4".

Width 24" | Height 15" | Depth 12"

Square corner wall cabinet with no shelves. This cabinet will take up 24" of wall space going out from the corner on each wall. The door will not have a soft close hinge.

Width 27" | Height 15" | Depth 12"

Wall cabinet that has 2 doors and no shelves.

Width 30" | Height 36" | Depth 12"

Wall blind cabinet with 2 adjustable shelves and a 7" stile. It can be installed right against the corner or pulled a maximum of 3" from the corner which would take up a total of 33" of wall space. Door width is 14-3/4" and the blind opening is 7-3/4" wide. A filler must be used between the blind and the adjacent cabinet so the doors are able to open without interference. The filler must be purchased separately.

Width 11.25" | Height 36" | Depth .25"

Wall skin that can be cut to size as needed.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 6” | Height 36” | Depth 12”

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the right side (installing on the left side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.

Width 7/8" | Height 5" | Depth 7/8"

Toe kick cap made from solid wood that will match the finish of the collection. It is used to finish the exposed side of the toe kick end and will need to be cut on site, prior to installation.

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.