Midtown Timber Shaker

Width 11-7/8" | Height 47.5" | Depth .375"

Beaded panel that has notched sections so multiple panels can be interlocked together. Beads are 1-1/2" wide, center-to-center. The exposed finished area of the panel is 11-7/8" wide but the total width of the panel is 12-7/8".

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet. Each drawer front measures 14-5/8" high.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 24"W x 12-1/2"H. It can be widened on site up to 28" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 30" | Height 34.5" | Depth 24"

Base oven cabinet with an opening size of 24"W x 21" H. The opening can be widened on site to a max cut out size of 28-1/2"W x 28-1/8"H.

Width 30" | Height 18" | Depth 12"

Wall appliance cabinet that is meant to sit on the countertop to hide appliances.