Midtown Timber Shaker

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 30" | Depth .25"

Wall skin that can be cut to size as needed.

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 36" | Depth .25"

Wall skin that can be cut to size as needed.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 3" | Height 42" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 11.25" | Height 42" | Depth .25"

Wall skin that can be cut to size as needed.

Width 3" | Height 84" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 90" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 23.25" | Height 96" | Depth .25"

Tall skin that can be cut to size as needed.

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).