Midtown Timber Shaker

Width 24" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 24" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 18"W x 12-1/2"H. It can be widened on site up to 22" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 24" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 24" | Height 34.5" | Depth 24"

2 full height door base cabinet with 2 shelves (shelves will not be included if roll outs are added).

Width 24" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 1 false drawer front. This cabinet will have no shelves.

Width 24" | Height 84" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 29-1/2" high and the bottom doors are 49-1/4" high. There are 5 shelves that are 21" deep.

Width 24" | Height 90" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 35-1/2" high and the bottom doors are 49-1/4" high. There are 6 shelves that are 21" deep.

Width 24" | Height 96" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 41-1/2" high and the bottom doors are 49-1/4" high. There are 6 shelves that are 21" deep.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).