Midtown Timber

SKU# STKM-8-GT-Assembled

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

$217.85

Midtown Timber Shaker Starter Molding

SKU# STRM-8-GT-Assembled

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

$217.85

Midtown Timber Shaker Inside Corner Molding

SKU# ICM8-GT-Assembled

Width 96" | Height .75" | Depth .75"

Inside corner molding.

$97.85

Midtown Timber Shaker Light Rail Molding

SKU# LRM-GT-Assembled

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

$239.93

Midtown Timber Shaker Quarter Round Molding

SKU# QRM-GT-Assembled

Width 96" | Height .75" | Depth .75"

Quarter round molding.

$102.59

Midtown Timber Shaker Outside Corner Molding

SKU# OCM8-GT-Assembled

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

$102.59

Midtown Timber Shaker 24" Drawer Bench Seat

SKU# DBS24-GT-Assembled

Width 24" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

$560.91

Midtown Timber Shaker 30" Drawer Bench Seat

SKU# DBS30-GT-Assembled

Width 30" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

$633.28

Midtown Timber Shaker 36" Drawer Bench Seat

SKU# DBS36-GT-Assembled

Width 36" | Height 16-3/8" | Depth 24"

Drawer bench seat cabinet with an overall height of 16-3/8" and a drawer front height of 11-11/4". The cabinet will have the same constrution as other drawer base cabinets with an open top, and the interior drawer depth will be 19-5/8".

$705.65

Midtown Timber Shaker 9x39 Wall Cabinet

SKU# W0939-GT-Assembled

Width 9" | Height 39" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

$434.20

Midtown Timber Shaker 12x39 Wall Cabinet

SKU# W1239-GT-Assembled

Width 12" | Height 39" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

$470.38

Midtown Timber Shaker 15x39 Wall Cabinet

SKU# W1539-GT-Assembled

Width 15" | Height 39" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

$500.54

Shipping Time:	Ships in 2-4 weeks
Style:	Shaker
Face Frame:	3/4" x 1-1/2" solid wood
Door Frame:	3/4" Thick x 2-1/2" W solid birch
Door Center:	3/8" thick birch veneer over MDF captured in frame w/rubber spacers
Door Frame Width:	2.5"
Center Panel Beveled Edge:	Yes
Sides:	1/2" birch veneered plywood sides, dovetailed into face frame
Top & Bottom (Wall):	1/2" thick birch veneered plywood
Bottom (Base):	1/2" thick birch veneered plywood
Back Panel:	1/2" thick birch veneered plywood
Shelves:	3/4" birch veneered plywood with matching edge banding, nickel plated shelf clips
Base Cabinet Shelf Depth:	18"
Drawer Front:	5-pc recessed panel
Drawer Box:	5/8" solid birch, dovetailed drawer box with 3/8" plywood bottom
Drawer Glides:	BLUM Zinc, undermount, full extension, soft close, 50 lbs capacity
Base Corner Supports:	1-1/2" x 1/2" panel beam
Overlay:	Full
Hinges:	BLUM 6-way adjustable, concealed, soft-close, opens 110
Cabinet Interior:	Natural finish
Center Stile:	None unless noted in cabinet description
Assembly Method:	Ships pre-assembled, dovetailed, glued, stapled, screwed
Finish:	Sherwin Williams stain with a catalytic conversion top coat
Toe Kick:	3/4" x 4-1/2" solid birch (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets)
Installation Rail:	1/2" full back so a specific rail isn't needed
KCMA Compliant:	Yes
CARB Compliant:	Yes
Door Hinges:	Please use drop down options for each cabinet to change hinging from right to left. Doors can also be flipped to change hinging after deliver, if needed.
Side Panels Finished:	No (side will be unfinished plywood, for exposed sides, be sure to add the finished side option, when selected, the matching side will also be flush with the side of the cabinet).
Installation/Design Note:	The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above.

Midtown Timber Shaker

Midtown White Shaker

Midtown Cloud Shaker

Midtown Cream Shaker

Midtown Painted Grey Shaker

Midtown Light Grey Shaker

Midtown Rift Oak Shaker

Midtown Mocha Shaker

Midtown Mint Green Shaker

Midtown Pistachio Green Shaker

Midtown Hunter Green Shaker

Midtown Denim Shaker

Midtown Blue Shaker

Midtown Indigo Shaker

Midtown Dark Grey Shaker

Midtown Ash Shaker

Midtown Black Shaker

Get Help

Thank you!