Midtown Indigo Shaker

Width 15" | Height 84" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 29-1/2" high and the bottom door is 49-1/4" high. There are 5 shelves that are 21" deep.

Width 18" | Height 84" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 29-1/2" high and the bottom door is 49-1/4" high. There are 5 shelves that are 21" deep.

Width 18" | Height 60" | Depth 15"

Wall cabinet with (2) 5-7/8" drawers on bottom and 1 door on top. There will be 3 adjustable shelves on the top of the cabinet. The frame will be flush with the side panel and both sides will be finished. **Note this cabinet has a 15" depth**

Width 24" | Height 84" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 29-1/2" high and the bottom doors are 49-1/4" high. There are 5 shelves that are 21" deep.

Width 30" | Height 84" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 29-1/2" high and the bottom doors are 49-1/4" high. There are 6 shelves that are 21" deep.

Width 33" | Height 84" | Depth 24"

Oven cabinet with two 11-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option.

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 3" | Height 84" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.