Midtown Cream Shaker

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 96"

Extra large cove crown molding. When installed, it will be 5-1/2" high and will stick out from the cabinet 5-1/2".

Width 96"

Large cove crown molding. When installed, it will be 4-1/2" high and will stick out from the cabinet 4-1/2".

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 96" | Height 6" | Depth .75"

Shiplap interlocking molding commonly used for walls, backsplash, or the backs of islands and peninsulas.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 3" | Height 30" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 42" | Depth 12"

Wall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.