Midtown Cloud Shaker

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2€
• Front width: 35-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€
• Max fan size: 40-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 23.25" | Height 34.5" | Depth .25"

Base skin to be used on the exposed side of a base or vanity cabinet (can be cut to size, as needed).

Width 42" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 42" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door in the middle, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the left and right. This cabinet will not have any shelves. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 42" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 2 false drawer fronts. This cabinet will have no shelves.

Width 42" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.