Midtown Cloud Shaker

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 11.5" | Height 29.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 30"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 35.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 36"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 11.5" | Height 41.5" | Depth "

Wainscot wall panel to be used on the exposed side of a 42"H x 12"D wall cabinet. It will match the door style of the cabinets being ordered.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height " | Depth .75"

Small batten molding.

Width 96" | Height 1.25" | Depth .375"

Decorative scribe molding. Flat front section is 3/4" high.

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.