Midtown Cloud Shaker

Width 27" | Height 36" | Depth 12"

2 door wall cabinet that has 3 adjustable shelves.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 27" | Height 36" | Depth 15"

Corner wall cabinet with no door that is designed to be used with a glass door (sold separately). Cabinet will have a finished interior and 3 adjustable 1/4" thick glass shelves. It will take up 27" of wall space out from the corner on each wall.

Width 27" | Height 36" | Depth 15"

Diagonal corner wall cabinet with 3 adjustable shelves. This cabinet will take up 27" of wall space going out from the corner on each wall. This cabinet will have a partial overlay door to ensure it opens without hitting the adjacent cabinet, so there will be about 1-1/8" of face frame, visible on either side of the door. The distance from the front middle of the cabinet to the back middle of the cabinet is 27".

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 36" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 4 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 6" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" wall filler must be ordered separately.

Width 6" | Height 36" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 6 cubes that will have finished interiors.

Width 3" | Height 36" | Depth 3"

Corner post. Height on top of the post will be 4", the bottom height is 6-1/4", 2" must be trimmed from the top or bottom of the post. **Posts are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 6€ | Height 36€ | Depth 12€

Open end wall cabinet with 2 shelves. Shelves are not adjustable, and bottom panel will be curved at the edge. This cabinet will be open on the left side (installing on the right side). Please note there will be visible screws on the back and side of the cabinet, as they are intended to be installed against two walls, or a wall and adjacent cabinet.