Midtown Cloud Shaker

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2€
• Front width: 35-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€
• Max fan size: 40-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 21" | Height 30" | Depth 12"

1 door wall cabinet that has 2 adjustable shelves.

Width 21" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 21" | Height 34.5" | Depth 24"

1 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 21" | Height 36" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

Width 21" | Height 42" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 3" | Height 30" | Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).

Width 3" | Height 34.5" | Depth 2.25"

Base plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.