Midtown Cloud Shaker

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 42" | Height 30" | Depth 21"

Arched wood hood with an overall depth of 21", the depth of the main part of the hood (which goes against the wall) is 15". The top panel will lift up and the sides will be flush. If crown is being installed, it would be installed above the cabinet, not on the face frame. A full interior stainless steel hood liner will also be installed (liner can be removed on site, if needed, however a hood liner is strongly recommended to prevent the wood hood from getting burned and is required by code in many places. The interior hood liner dimensions are as follows:

• Rear width: 40-1/2€
• Front width: 35-7/8€
• Depth of 34-1/2€ section: 13-3/4€
• Depth of 29-7/8€ section: 4-1/2€
• Max fan size: 40-1/2€ x 13-3/4€
• Note that a blower is not included and must be purchased separately

Width 12" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.

Width 15" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.

Width 18" | Height 34.5" | Depth 21"

3-drawer vanity base cabinet. Top drawer front is 6-3/4", middle and bottom drawer fronts are 11-1/4" high. There will be a 2" clearance between the drawers and back panel.

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x30 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x90 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 24" | Height 34.5" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. Drawer front is 6-3/4" high. This cabinet will not have any shelves. This vanity has the option to add a decorative platform and feet, scroll through the cabinetry images to view the two platform styles: shaker or vera, along with the two feet styles: cove or taper. The images will be shown in white but will match the finish being ordered. The cove and taper feet include adjustable plastic leveling feet for easy adjustment on uneven surfaces. The leveling foot projects 1/16" when fully retracted to elevate the feet off the finished floor and is extendable up to 1/2". The leveling foot comes pre-attached to the decorative feet and is non-removable. The platform and feet will ship loose, to be installed on-site. *If a decorative platform and feet option is selected, the cabinet will also come with finished sides.*

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.