Midtown Cloud Shaker

Width 18" | Height 36" | Depth 12"

1 door wall cabinet that has 3 adjustable shelves.

Width 18" | Height 96" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 41-1/2" high and the bottom door is 49-1/4" high. There are 6 shelves that are 21" deep.

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 3" | Height 96" | Depth 24"

Refrigerator end panel with 3" stile on the front. The panel itself is 3/4" thick.

Width 18" | Height 36" | Depth 12"

Wall cabinet with no door that is designed to be used with a glass door (sold separately). Cabinet will have a finished interior, 3 adjustable 1/4" thick glass shelves, and pre-installed hinges.

Width 18" | Height 36" | Depth 12"

Wall open shelf cabinet with a finished interior. There will be a valance on top and 3 adjustable shelves with an Ogee edge.

Width 3" | Height 36" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**

Width 3" | Height 36" | Depth 15"

Wall column that can be trimmed on site if needed.

Width 3" | Height 36" | Depth 24"

Spice pull out to be used with a wall filler (sold separately). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 4 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" wall filler must be ordered separately.

Width 3" | Height 96" | Depth 27"

Tall column that can be trimmed on site if needed.

Width 3" | Height 96" | Depth 2.25"

Tall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top section above the pilaster is 4" tall, and bottom section below the pilaster is 6-1/4" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**