Midtown Cloud Shaker

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 33" | Height 90" | Depth 24"

Oven cabinet with two 17-1/2" high doors on top, and 1, 2 or 3 drawers on bottom. Single ovens will have 3 drawers, Combo ovens will have 2 drawers and Double ovens will have 1 drawer. There will be a fixed shelf located above the uppermost drawer for each oven option.

• The top drawer front is 6-3/4" high and the middle and bottom drawer fronts are 11-1/4" high.
• When using a single oven, the minimum opening measurements will be 27"W x 28-1/2"H, it can be widened on site to a maximum of 31"W x 37"H.
• When using as a combo oven, the minimum opening measurements will be 27"W x 39 3/8"H, it can be widened to a maximum of 31"W x 44"H.
• When using as a double oven, the minimum opening measurements will be 27"W x 50-3/4"H, it can be widened on site to a maximum of 31"W x 55-1/2"H.

Width 18" | Height 90" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 35-1/2" high and the bottom door is 49-1/4" high. There are 6 shelves that are 21" deep.

Width 24" | Height 90" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 35-1/2" high and the bottom doors are 49-1/4" high. There are 6 shelves that are 21" deep.

Width 30" | Height 5" | Depth 21"

Vanity knee drawer that can be trimmed up to 24" if needed. The drawer front is 23-1/2" wide, then there will be 3-1/4" of trimmable space on either side of the drawer front. The interior height of the drawer is 2-1/2". It has side mounted, ball-bearing slides (not soft close).

Width 30" | Height 90" | Depth 24"

Pantry cabinet that will have 4 doors; 2 shorter doors on top and 2 taller doors on bottom. The top doors are 35-1/2" high and the bottom doors are 49-1/4" high. There are 6 shelves that are 21" deep.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Quarter round molding.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 96" | Height .75" | Depth 2.5"

Stacking molding to be used as a decorative piece between cabinets that are getting stacked one above the other. This hides the 'cabinet seam' that you would normally see without a decorative molding in between or applied over the seam.

Width 15" | Height 90" | Depth 24"

Pantry cabinet that will have 2 doors; 1 shorter door on top and 1 taller door on bottom. The top door is 35-1/2" high and the bottom door is 49-1/4" high. There are 6 shelves that are 21" deep.