Township White

Width 96" | Height 3/4" | Depth 2-1/2"

Bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 96" | Height 2-1/2" | Depth 2"

Curved crown molding that will have a height of 2-1/2" once installed and will stick out 2" from the cabinet.

Width 96" | Height 48" | Depth 1/4"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. The panel will be finished on both sides but not the edges.

Width 96" | Height 48" | Depth .75"

Finished plywood panel that can be trimmed to finish the back of an island or other cabinets. This panel can also be used as refrigerator panel if one is needed that is deeper than 24". It comes finished on one side, and one of the long and short edges.

Width 96" | Height 3-1/2" | Depth 2-7/8"

Large curved crown molding that will have a height of 3-1/2" once installed and will stick out 2-7/8" from the cabinet.

Width 96" | Height 2" | Depth 2-1/2"

Light rail molding.

Width 96" | Height 1" | Depth 1"

Outside corner moldingthat comes in 8 ft long sections.

Width 96" | Height 3/4" | Depth 2-1/2"

Single bead molding which is commonly used between cabinets when stacking, or to cover or transition architectural elements, decorative riser piece, etc...

Width 4" | Height 34-1/2" | Depth 4"

Square decorative post that will be flat on all sides.

Width 96" | Height 1/4" | Depth 3/4"

Scribe molding that comes in 8 ft long sections.

Width 4" | Height 34-1/2" | Depth 4"

Decorative post with shaker detail on the sides, a flat 6" tall section on top and a flat 4-1/2" tall section on bottom.

Width 96" | Height 4-1/2"| Depth 1/2"

Toe kick molding that comes in 8 ft sections.