Stone Grey

Width 27" | Height 42" | Depth 12"

Wall cabinet that has 2 doors and 3 adjustable shelves.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 30" | Height 15" | Depth 12"

Lattice wine rack that can be installed vertically or horizontally. Holds 11 bottles up to 3-3/4" in diameter.

Width 24" | Height 42" | Depth 12"

Easy reach corner wall cabinet with 3 adjustable shelves. This cabinet will take up 24" of wall space going out from the corner on each wall.

Width 15" | Height 15" | Depth 12"

Wine storage cabinet with a matching finished interior. This cabinet must be installed between two cabinets, a cabinet and a wall, or mounted to a horizontal surface.

Width 18" | Height 18" | Depth 12"

Wine storage cabinet with a matching finished interior. This cabinet must be installed between two cabinets, a cabinet and a wall, or mounted to a horizontal surface.

Width 30" (from the corner out, on each wall) | Height 6" | Depth 12"

Spice drawer wall cabinet with 6 spice drawers. The drawers will not have any drawer glides. The interior comes finished and can also be used without the drawers as a wine rack. If the drawers are used, they are not able to be turned, the cabinet must be installed horizontally for them to function properly.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 9" | Height 30" | Depth 12"

Wall cabinet that has 1 door and 2 adjustable shelves.