Stone Grey

Width 23.25" | Height 90" | Depth .75"

Tall end panel to be used on the side of an 90" tall cabinet. The doors will come as 2 separate panels.

Width 42" | Height 96" | Depth .75"

Plywood edge banded panel that is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 5 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 96" | Height 1-21/32" | Depth .25

Batten molding that comes in 8 ft long sections and is 0.25" thick.

Width 23.25" | Height 84" | Depth .75"

Tall end panel to be used on the side of an 84" tall cabinet. The doors will come as 2 separate panels.

Width 23.25" | Height 96" | Depth .75"

Tall end panel to be used on the side of an 96" tall cabinet. The doors will come as 2 separate panels.

Width 20.25" | Height 30" | Depth .75"

Decorative end panel for the side of a vanity base cabinet. *Please note actual width is 20-1/4"*

Width 3" | Height 42" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.