Stone Grey

Width 33" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 33" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 33" | Height 34.5" | Depth 24"

Easy reach corner base cabinet with (1) 1/2 depth, adjustable (non-removable, once installed) shelf.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 33" | Height 34.5" | Depth 24"

Lazy Susan corner base cabinet that has 2 stainless steel adjustable height baskets. Baskets will hold up to 75 lbs. each.

Width 3" | Height 42" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 42" | Depth .75"

Wall fluted filler that can be trimmed to desired height and has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. This filler will be finished on the front, back and sides, but not the top or bottom.