Rustic Shaker

Width 36" | Height 24" | Depth 24"

Wall refrigerator cabinet that has 2 doors and 1 adjustable, full depth shelf.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 36" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 96" | Height .75" | Depth .25"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 0.75" | Depth 0.25"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 9" | Height 34.5" | Depth 24"

Tray base cabinet that has no shelves with a door opening that measures 5-7/8" W x 26-7/8" H

*Please note that new cabinet inventory (hinged on either the left or right), is going to be replacing the current 'universal' cabinet inventory. During this transition period, if a Left or Right option for this cabinet is selected, but not yet available, you will receive one of the universal bases, which can be hinged either Left or Right, after delivery, on site.*

Width 96" | Height 4.5" | Depth .25"

Toe kick that comes in 8' long sections and can be cut to size if necessary.

Width 36" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 36" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 36" |Height 34.5" |Depth 24"

Blind corner base cabinet that must be pulled a minimum of 4" from the wall. It may be necessary to pull further to allow clearance for door and drawer hardware. It can be pulled a maximum of 9". The door is 14-1/2"W, and the blind area is 22"W x 28-1/2"H. A filler will be needed to go adjacent to the blind cabinet so the door/drawer will open properly.