Rustic Shaker

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with 1 drawer on bottom. Opening will be 27"W x 15-1/2"H.