Rustic Shaker

Width 36" | Height 24" | Depth 24"

Wall refrigerator cabinet that has 2 doors and 1 adjustable, full depth shelf.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 36" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 36" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 36" |Height 34.5" |Depth 24"

Blind corner base cabinet that must be pulled a minimum of 4" from the wall. It may be necessary to pull further to allow clearance for door and drawer hardware. It can be pulled a maximum of 9". The door is 14-1/2"W, and the blind area is 22"W x 28-1/2"H. A filler will be needed to go adjacent to the blind cabinet so the door/drawer will open properly.

Width 36" | Height 34.5" | Depth 24"

Easy reach corner base cabinet with (1) 1/2 depth, adjustable (non-removable, once installed) shelf.

Width 36" | Height 34.5" | Depth 24"

Corner drawer base cabinet that comes with 3 full extension drawers (1 standard drawer on top and 2 deep drawers below). The top drawer interior is 3-1/8" deep and the bottom drawers have an interior depth of 6-1/8. If placing this cabinet next to an appliance deeper then 24" a filler should be used. Please note that the drawers in this cabinet are not dovetail.

Width 36" | Height 34.5" | Depth 24"

3 drawer base cabinet that has 1 standard drawer on top and 2 deep drawers below.

Width 36" | Height 34.5" | Depth 24"

Width 36" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*