Rustic Shaker

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides, however it will have a natural finish, to achieve the knotty appearance, a skin must be purchased to apply to the side of the refrigerator panel. This can be done using the 'View Options' button, or by adding the Rustic Shaker 24x96 Tall Skin (HS-TS2496) under 'Skins and Panels' section under 'Cabinet Accessories'.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 23.25" | Height 96" | Depth .25"

Tall skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 18" | Height 96" | Depth 24"

2 door (1 smaller door on top and 1 larger door on bottom) utility/pantry cabinet that comes with 4 adjustable shelves that can be used in either the top or bottom section. The bottom section is 54" high.

Width 48" | Height 96" | Depth 3/8"

Beadboard panel that can is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 96" | Height 36" | Depth 0.5"

Island panel that is 1/2" thick, grain runs left to right if the panel is on its side (making it 96" wide and 36" high). This panel comes finished on both sides.

Width 23.25" | Height 96" | Depth .75"

Tall end panel to be used on the side of an 96" tall cabinet. The doors will come as 2 separate panels.

Width 30" | Height 36" | Depth 18"

Microwave cabinet that has an opening dimension of 26-7/8"W x 18-1/2"H and a shelf depth of 20". There are no upper shelves behind the doors above the opening. *Please note this cabinet has a depth of 18"*