Rustic Shaker

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 33" | Height 34.5" | Depth 24"

Sink base cabinet that has no shelves or drawers.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 96" | Height .75" | Depth .25"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 0.75" | Depth 0.25"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 96" | Height 4.5" | Depth .25"

Toe kick that comes in 8' long sections and can be cut to size if necessary.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 33" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 33" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.