Rustic Shaker

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides, however it will have a natural finish, to achieve the knotty appearance, a skin must be purchased to apply to the side of the refrigerator panel. This can be done using the 'View Options' button, or by adding the Rustic Shaker 24x96 Tall Skin (HS-TS2496) under 'Skins and Panels' section under 'Cabinet Accessories'.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 24" | Height 84" | Depth 24"

4 door (2 smaller door on top and 2 larger door on bottom) utility/pantry cabinet that comes with 4 adjustable shelves that can be used in either the top or bottom section. The bottom section is 54" high.

Width 24" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.