Rustic Shaker

Width 30" | Height 15" | Depth -

Plate rack that holds 10 plates and can also be installed under a shorter wall cabinet.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 23.25" | Height 96" | Depth .25"

Tall skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 30" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 2 drawers.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with 1 drawer on bottom. Opening will be 27"W x 15-1/2"H.

Width 23.25" | Height 34.5" | Depth .25"

Base skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 30" | Height 34.5" | Depth 24"

Width 30" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 30" | Height 15" | Depth 12"

Lattice wine rack that can be installed vertically or horizontally. Holds 11 bottles up to 3-3/4" in diameter.

Width 23.25" | Height 84" | Depth .75"

Tall end panel to be used on the side of an 84" tall cabinet. The doors will come as 2 separate panels.