Rustic Shaker

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides, however it will have a natural finish, to achieve the knotty appearance, a skin must be purchased to apply to the side of the refrigerator panel. This can be done using the 'View Options' button, or by adding the Rustic Shaker 24x96 Tall Skin (HS-TS2496) under 'Skins and Panels' section under 'Cabinet Accessories'.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 24" | Height 84" | Depth 24"

4 door (2 smaller door on top and 2 larger door on bottom) utility/pantry cabinet that comes with 4 adjustable shelves that can be used in either the top or bottom section. The bottom section is 54" high.

Width 24" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 24" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 1 drawer.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet that has 1 half depth adjustable shelf and 2 drawers. This cabinet does have a center stile and will not have butt doors.

Width 24" | Height 34.5" | Depth 24"

2 door base end angle cabinet that has 1 adjustable shelf. The sides of the cabinet that will install against the wall and adjacent cabinet are 24". Each door front area measures 18-1/4" wide.

Width 48" | Height 96" | Depth 3/8"

Beadboard panel that can is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.