Rustic Shaker

Width 96" | Height 9/16" | Depth .25"

Rope insert for crown molding (LCM8) that comes in 8 ft long sections. There is a flat section on the crown to accommodate the rope insert installation. If it seems the rope insert will not attach properly, make sure the crown is not upside down.

Width 30" | Height - | Depth 12"

Stem glass holder that is made of solid wood and mounts to the bottom of a wall cabinet and can be cut to fit smaller cabinets. It will hold 6 rows of glasses (if full 30" width is used). Once installed, it hangs down 1.75". This product ships pre-assembled.

Width 96" | Height .75" | Depth .25"

Shoe molding that can be trimmed to desired height and/or width.

Width 96" | Height 0.75" | Depth 0.25"

Scribe molding that comes in 8 ft long sections. It can be used behind light rail molding when wrapping around the side of a wall cabinet.

Width 36" | Height 96" | Depth .25"

1/4" thick stained panel. Grain runs up and down if the panel is stood up tall (making it 96" high and 36" wide). This panel comes finished on one side.

Width 96" | Height 4.5" | Depth .25"

Toe kick that comes in 8' long sections and can be cut to size if necessary.

Width 23.25" | Height 96" | Depth .25"

Tall skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 96" | Height 1-21/32" | Depth .25

Batten molding that comes in 8 ft long sections and is 0.25" thick.

Width 23.25" | Height 34.5" | Depth .25"

Base skin that is 1/4" thick and can be cut to size if necessary. *Please note actual width is 23-1/4"*

Width 30" | Height 15" | Depth 12"

Lattice wine rack that can be installed vertically or horizontally. Holds 11 bottles up to 3-3/4" in diameter.

Width 9" | Height 30" | Depth 12"

Wall cabinet that has 1 door and 2 adjustable shelves.