Phoenix Cream Glaze

Width 96" |Height 24" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 36" | Depth .25"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" | Height 36" | Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height 48" | Depth .25"

Finished panel on both sides. Commonly used to finish the back of an island. Outside corner molding would be needed to finish the edges.

Width 96" |Height 48" |Depth .75"

Finished panel on both sides with edge banding along all 4 edges. The edge banding will not be a perfect match to the finishing on the front of the panel. Scribe molding will also be included which can be installed (using either small finishing nails, which should be countersunk slightly, or glue) onto the edge banded side for a 100% match. If the Scribe molding is not needed, please select "No" by opening the Options button, otherwise Scribe will also be included with the panel.

Width 96" | Height .75" | Depth .75"

Decorative inside corner molding.

Width 96" | Height .6875" | Depth "

Dentil molding insert to be used with the CCM8 Classic Crown Molding or CM8 Crown Molding.

Width 96" | Height 1.5" | Depth 2"

Light rail molding that is commonly used to hide lighting under wall cabinets.

Width 96" | Height 2" | Depth .75"

Mirror molding to be used to frame out a custom mirror. The mirrored glass would need to be purchased separetely.

Width 96" | Height 2" | Depth .75"

Ogee molding.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Commonly used to finish edges on islands or other areas.

Width 96" | Height .75" | Depth .75"

Quarter round molding.