Metro White - Quick Ship

Width 48" | Height 6" | Depth 3/4"

Arched valance. Minimum height in the middle of the valance is 3".

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2‚¬ on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 96" | Height 1-3/4" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4" high.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" high.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has 3 drawers on either end and 2 doors in the middle, with a false drawer front above the doors. The doors and false drawer front measure about 23-1/2"W. The doors are 22-1/2"H and the false drawer is 6-1/4"H. For the 6 functioning drawers, the 2 top drawers are 11-1/2"W x 6-1/4"H, the bottom 4 drawers are 11-1/2"W x 11-1/8"H. Interior top drawer dimensions are 8-1/2"W x 3-3/8"H x 18"D, bottom drawer interiors are 8-1/2"W x 8-1/4"H x 18"D.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has two 23-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 14-1/2" wide functional drawer on either side on top. Cabinet will have a center stile.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 3-5/8" | Depth 3-1/2"

Cove crown molding. Installed height will be 3-5/8" and it will stick out 3-1/2" from the cabinet.