Madison Moss Shaker - Quick Ship

Width 6" |Height 96" |Depth .75"

6"x96" Filler.

Width 25.5" (42" wall space on each wall) | Height 34.5" | Depth .75"

Corner sink base front and floor. Finished toe kick is not included. Once installed, this will take up 42" of wall space from the corner out, on each wall. These items should be installed between two cabinets, they cannot be used with an appliance directly on either side. To ensure proper installation, additional countertop support will be needed along the back wall and corner area. Additionally, a base support should be built on-site to provide adequate stability. Please note that hardware is not provided to attach this item to adjacent cabinets due to the flexibility and versatility of the item and how it could be used.

Width 24" |Height 96" |Depth .75"

Used to create bookshelves or any custom item that requires a-3/4" thick shelf. Both sides of the panel are finished however, it is edge banded on only one of the 96" sides.

Width 3" |Height 42" |Depth .75"

3"x42" Filler.

Width 3" |Height 96" |Depth .75"

3"x96" Filler.

Width 23.5" |Height 29" |Depth .75"

Base Decorative Door

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 36" |Height 96" |Depth .75"

Used to create bookshelves or any custom item that requires a 3/4" thick shelf. Both sides of the panel are finished however, it is edge banded on only one of the 96" sides.

Width 96" |Height 4.9375" |Depth .75"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 48" |Height 6" |Depth .75"

Shaker arched valance. The height in the middle of the valance is 3".

Width 5.5" |Height 29" |Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 6" |Height 42" |Depth .75"

6"x42" Filler.

Width 11.5" |Height 29" |Depth .75"

Wall decorative end panel.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*