Hudson Ember - Quick Ship

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 39" | Height 34-1/2" | Depth 24"

1 door blind base corner cabinet.

• Takes up a minimum of 42-1/2" of wall space and can be pulled up to 49"
• The actual cabinet width is 39"
• Has a minimum pull of 3-1/2" and a maximum pull of 10" from the corner
• Has 1 drawer and is reversible
• Door measurements are 15-3/4"W x 22-1/2"H x 3/4"D
• Drawer front measurements are 15-3/4"W x 6-1/4"H x 3/4"D
• Drawer box is 12-3/8"W x 3-3/8"H x 20-3/8"D
• Door opening is 12-3/4"W x 20-1/2"H
• The stile between the door opening and blind opening is 10"W
• A filler must be installed between the blind cabinet and the adjacent wall cabinet (so it's perpendicular to the blind cabinet)

Width 96" | Height 1.75" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H.

Width 96" |Height 3" |Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3"H.

Width 96" | Height 4-15/16" | Depth 3/4"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 3" | Depth 2"

Crown molding. Installed height will be 3" and it will stick out 2" from the cabinet.

Width 96" | Height 1-3/16" | Depth 1-9/16"

Light rail molding.

Width 96" | Height 1" | Depth 2"

Angled light rail molding.