Hudson Ember - Quick Ship

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 96" | Height 1.75" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H.

Width 25-3/8" | Height 3-3/8" | Depth 20-3/8"

Roll out tray for an 30" base cabinet or pantry. Comes with full extension side-mount ball bearing glides. Roll out tray will come in a natural maple finish. The roll out trays have dovetail joints, the bottom of the trays are plywood and the sides are birch hardwood.

*Please note this roll out tray will only work with this collection*

Width 96" |Height 3" |Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3"H.

Width 96" | Height 4-15/16" | Depth 3/4"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 3" | Depth 2"

Crown molding. Installed height will be 3" and it will stick out 2" from the cabinet.

Width 96" | Height 1-3/16" | Depth 1-9/16"

Light rail molding.

Width 96" | Height 1" | Depth 2"

Angled light rail molding.