Hudson Ember - Quick Ship

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 23-1/2" | Height 78-1/2" | Depth 3/4"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels. There will be a horizontal decorative stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23-1/2" | Height 84-1/2" | Depth 3/4"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels.There will be a decorative horizontal stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 23-1/2" | Height 90-1/2" | Depth 3/4"

Tall decorative door set consisting of 2 doors. Commonly used for the sides of oven cabinets, pantry cabinets and refrigerator panels. There will be a decorative horizontal stile in the middle of the bottom decorative door.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 96" | Height 1.75" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H.

Width 96" |Height 3" |Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3"H.

Width 96" | Height 4-15/16" | Depth 3/4"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height 3" | Depth 2"

Crown molding. Installed height will be 3" and it will stick out 2" from the cabinet.