Hudson Ember - Quick Ship

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has two 23-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 14-1/2" wide functional drawer on either side on top. Cabinet will have a center stile.

Width 96" | Height 1.75" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has 3 drawers on either end and 2 doors in the middle, with a false drawer front above the doors.

• Doors and false drawer front are 23-1/2"W
• Doors are 22-1/2"H
• False drawer is 6-1/4"H
• 2 top drawers are 11-1/2"W x 6-1/4"H
• Bottom 4 drawers are 11-1/2"W x 11-1/8"H
• Interior Top drawer is 8-1/2"W x 3-3/8"H x 18"D
• Bottom drawer is 8-1/2"W x 8-1/4"H x 18"D

Width 96" |Height 3" |Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3"H.

Width 96" | Height 4-15/16" | Depth 3/4"

Base molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 48" | Height 6" | Depth 3/4"

Shaker arched valance. The height in the middle of the valance is 3".