Hudson Dune - Quick Ship

Width 9" | Height 34-1/2" | Depth 24"

Base tray cabinet with 1 full height door and no shelves.

Width 96" | Height 3/4" | Depth 1/4"

Scribe molding.

Width 96" | Height 4-1/2" | Depth 1/4"

Toe kick. This is required if any cabinets will be going side by side to cover the seams and cover the small gap from one cabinet to the next.

Width 9" | Height 36" | Depth 12"

1 door wall cabinet that comes with 2 shelves.

Width 9" | Height 42" | Depth 12"

1 door wall cabinet that comes with 3 shelves.

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 96" | Height 3/4" | Depth 3/16"

Batten molding.

Width 96" | Height 3/4" | Depth 1/2"

Shoe molding.

Width 96" | Height 3/4" | Depth 1/4"

Outside corner molding.

Width 9" | Height 34.5" | Depth 24"

1 full height door cabinet with a shelf pullout. The pullout will be mounted to the cabinet door and floor. It will included full-extension glides with Blumotion soft-close (110 lb. weight capacity). Please note that ready to assemble orders will be shipped in 2 boxes.

Width 48" | Height 34-1/2" | Depth 21"

Vanity that has two 23-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 14-1/2" wide functional drawer on either side on top. Cabinet will have a center stile.

Width 96" | Height 1.75" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4"H.