Frosted White Shaker

Width 3" | Height 34-1/2" | Depth 3/4"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34-1/2" | Depth 3/4"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34-1/2" | Depth 3/4"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1-1/2" from the top and end 1-1/2" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34-1/2" | Depth 3/4"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 5 flutes that begin 1-1/2" from the top and end 1-1/2" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 23-1/4" | Height 84" | Depth 3/4"

Tall end panel to be used on the side of an 84" tall cabinet. The doors will come as 2 separate panels.

Width 23-1/4" | Height 90" | Depth 3/4"

Tall end panel to be used on the side of an 90" tall cabinet. The doors will come as 2 separate panels.

Width 23-1/4" | Height 96" | Depth 3/4"

Tall end panel to be used on the side of an 96" tall cabinet. The doors will come as 2 separate panels.

Width 20-1/4" | Height 30" | Depth 3/4"

Decorative end panel for the side of a vanity base cabinet. *Please note actual width is 20-1/4"*

Width 42" | Height 96" | Depth 3/4"

Plywood edge banded panel that is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 3" | Height 96" | Depth 3/4"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth 3/4"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1-1/2" from the top and end 1-1/2" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 42" | Depth 3/4"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.