Cobblestone Grey

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet that has 1 half depth adjustable shelf and 2 drawers. This cabinet does have a center stile and will not have butt doors.

Width 48" | Height 96" | Depth 3/8"

Beadboard panel that can is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 48" | Height 34.5" | Depth 21"

Vanity combination cabinet that has 2 doors in the center, 3 drawers on either side of the doors, and a fake drawer front on top of the doors. The top drawers are standard sized and the bottom 2 drawers (on both sides) are deep drawers. All 6 drawers are fully functioning and there are no shelves.

Width 48" | Height 4.5" | Depth -

Arched valance that can be trimmed down to needed size. It will be 4-1/2" high at the tallest points on the ends of the valance.

Width 3" | Height 42" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Wall filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.