Cobblestone Grey

Width 12" | Height 34.5" | Depth 24"

3 drawer base cabinet that has 1 standard drawer on top and 2 deep drawers below.

Width 12" | Height 34.5" | Depth 24"

1 door base cabinet that has a half depth adjustable shelf and 1 drawer.

*Please note that new cabinet inventory (hinged on either the left or right), is going to be replacing the current 'universal' cabinet inventory. During this transition period, if a Left or Right option for this cabinet is selected, but not yet available, you will receive one of the universal bases, which can be hinged either Left or Right, after delivery, on site.*

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 12" | Height 34.5" | Depth 24"

Spice rack base cabinet with a 8-7/8" opening and a full height door. The cabinet has 3 fixed shelves and side-mounted, ball-bearing glides. Please note the interior of the pullout will be in a natural finish.

Width 3" | Height 42" | Depth 1.375

Split corner decorative leg that is 3" wide, 42" high and 1-3/8" deep. The top flat section is 7" high and the bottom flat section is 7-1/4" high.

Width 3" | Height 96" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width and has toe kick notch on bottom. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 96" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 12" | Height 34.5" | Depth 21"

Vanity base cabinet that has 1 door and 1 drawer. There will be 1 half depth, adjustable shelf.

Width 12" | Height 34.5" | Depth 21"

Vanity drawer base cabinet that has 1 standard drawer on top and 2 deep drawers on bottom.

Width 12" | Height 12" | Depth 12"

Decorative wall cabinet with 1 plain glass door. Cabinet is shipped pre-assembled. The glass is also included.