Cobblestone Grey

Width 24" | Height 34.5" | Depth 24"

3 drawer base cabinet that has 1 standard drawer on top and 2 deep drawers below.

Width 96" | Height 4.5" | Depth 11/16"

Decorative base molding that comes in 8 ft long sections and is 11/16" thick.

Width 24" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 96" | Height 36" | Depth 0.5"

Island panel that is 1/2" thick, grain runs left to right if the panel is on its side (making it 96" wide and 36" high). This panel comes finished on both sides.

Width 96" | Height 3.375" | Depth -

Crown molding that comes in 8 ft long sections. When applying crown to full overlay cabinets, a crown backer will be required (block of wood that is installed to the top of the cabinet where the crown will be attached to). When installed, crown is 3-3/8"H and sticks out from the cabinet 2-1/2. There is a flat part to accommodate a rope insert (ROPE8) installation if desired.

Width 96" | Height 1" | Depth 1-7/16"

Light Rail Molding that is sold in 8 ft long sections.

Width 96" | Height 13/16" | Depth 13/16"

Outside corner molding that is sold in 8 ft long sections. Each side is 3/4" thick.

Width 24" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 24" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 1 drawer.

Width 24" | Height 34.5" | Depth 24"

2 door base end angle cabinet that has 1 adjustable shelf. The sides of the cabinet that will install against the wall and adjacent cabinet are 24". Each door front area measures 18-1/4" wide.

Width 96" | Height 1-21/32" | Depth .25

Batten molding that comes in 8 ft long sections and is 0.25" thick.