Cobblestone Grey

Width 24" | Height 34.5" | Depth 24"

3 drawer base cabinet that has 1 standard drawer on top and 2 deep drawers below.

Width 24" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 24" | Height 34.5" | Depth 24"

2 drawer base cabinet with 2 equal sized deep drawers.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 24" | Height 34.5" | Depth 24"

2 door base cabinet that has a half depth adjustable shelf and 1 drawer.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet that has 1 half depth adjustable shelf and 2 drawers. This cabinet does have a center stile and will not have butt doors.

Width 24" | Height 34.5" | Depth 24"

2 door base end angle cabinet that has 1 adjustable shelf. The sides of the cabinet that will install against the wall and adjacent cabinet are 24". Each door front area measures 18-1/4" wide.

Width 48" | Height 96" | Depth 3/8"

Beadboard panel that can is trimmable, if needed. The grain (for stained collections) will run along the long side of the panel.

Width 24" | Height 30" | Depth -

Set of mullion doors for a 24"W x 30"H wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 24" | Height 36" | Depth -

Set of mullion doors for a 24"W x 36"H wall cabinet that will match the door style of the cabinet and has clear glass. The glass is also included.

Width 24" | Height 42" | Depth -

Set of mullion doors for a 24"W x 42"H wall cabinet that will match the door style of the cabinet and has plain glass. The glass is also included.

Width 24" | Height 96" | Depth -

Refrigerator end panel that has a 1/2" thick panel with a 1-1/2"W filler on the front. This refrigerator end panel can be trimmed to desired height and may be used either left or right. This panel comes finished on both sides.