Cobblestone Grey

Width 13-3/4" | Height 16" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit and full extension, soft-closing glides.

Width 60" | Height 34.5" | Depth 21"

Vanity combination cabinet that has 2 sets of doors on either side of the cabinet, 3 drawers in the middle, and a fake drawer front on top of each set of doors. The top drawer is standard sized and the bottom 2 drawers are deep drawers. The 3 middle drawers are fully functioning and there are no shelves.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 24" | Height 36" | Depth 8"

Toilet topper cabinet with 2 doors and 1 tilt-out drawer on bottom. There will be a finished opening between the doors and tilt-out drawer that is 20-7/8"W x 5-3/4"H.

Width 30" | Height 7.5" | Depth 21"

Under counter/knee drawer that can be bumped out with 2x4's if being used with 24" deep cabinets. This is designed to be installed under counter to create a desk area between either vanity cabinets (21" depth) or standard base cabinets (24" depth). The overall width is 30" which can be trimmed if necessary (up to 1-1/2" on each side). Actual drawer front width is about 24".

Width 36" | Height 7.5" | Depth 21"

Under counter/knee drawer that can be bumped out with 2x4's if being used with 24" deep cabinets. This is designed to be installed under counter to create a desk area between either vanity cabinets (21" depth) or standard base cabinets (24" depth). Overall width is 36" which can be trimmed if necessary. Actual drawer front width is about 30".

Width 21" | Height 34.5" | Depth 21"

Vanity sink base that has 1 door and 1 false drawer front. There are no shelves or drawers.

Width 24" | Height 34.5" | Depth 21"

Vanity sink base cabinet that has 2 doors and 1 false drawer front. There are no shelves or drawers.

Width 24" | Height 34.5" | Depth 21"

Vanity sink base cabinet that has 1 door on the right, 2 functioning deep drawers on the left and 2 fake drawer fronts across the top. There are no shelves.

Width 24" | Height 34.5" | Depth 21"

Vanity sink base cabinet that has 1 door on the left, 2 functioning deep drawers on the right and 2 fake drawer fronts across the top. There are no shelves.

Width 27" | Height 34.5" | Depth 21"

Vanity sink base cabinet that has 2 doors and 1 false drawer front. There are no shelves or drawers.