Cobblestone Grey

Width 24" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 30" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 36" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 42" | Height 2-1/2" | Depth 10"

Floating shelf that can be installed as floating or between two cabinets or between one cabinet and a wall. The shelf will be finished to match on the front, sides, top and bottom. The maximum load is 15 lbs per linear foot. *Please note that the floating shelves are not trimmable.*

Width 30" | Height 15" | Depth 12"

Lattice wine rack that can be installed vertically or horizontally. Holds 11 bottles up to 3-3/4" in diameter.

Width 24" (from the corner out, on each wall) | Height 18" | Depth 12"

1 door appliance garage that is designed for installation on a countertop. It will fit directly below a wall diagonal corner cabinet.

Width 30" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 23.5" | Depth 8"

Range hood front that must be installed between 2 cabinets for support. Before installation of the range hood front, the blower should be installed and the depth adjusted using fillers and/or panels to fit the blower. The sides will be pre-finished to match.

Width 36" | Height 18" | Depth 12"

2 door wall cabinet that has no shelves.

Width 36" | Height 21" | Depth 12"

2 door wall cabinet that has no shelves.

Width 36" | Height 24" | Depth 12"

2 door wall cabinet that has 1 adjustable shelf.

Width 36" | Height 30" | Depth 12"

2 door wall cabinet that has 2 adjustable shelves.