Cobblestone Grey

Width 12" | Height 34.5" | Depth 24"

3 drawer base cabinet that has 1 standard drawer on top and 2 deep drawers below.

Width 96" | Height 4.5" | Depth 11/16"

Decorative base molding that comes in 8 ft long sections and is 11/16" thick.

Width 96" | Height 36" | Depth 0.5"

Island panel that is 1/2" thick, grain runs left to right if the panel is on its side (making it 96" wide and 36" high). This panel comes finished on both sides.

Width 96" | Height 3.375" | Depth -

Crown molding that comes in 8 ft long sections. When applying crown to full overlay cabinets, a crown backer will be required (block of wood that is installed to the top of the cabinet where the crown will be attached to). When installed, crown is 3-3/8"H and sticks out from the cabinet 2-1/2. There is a flat part to accommodate a rope insert (ROPE8) installation if desired.

Width 96" | Height 1" | Depth 1-7/16"

Light Rail Molding that is sold in 8 ft long sections.

Width 96" | Height 13/16" | Depth 13/16"

Outside corner molding that is sold in 8 ft long sections. Each side is 3/4" thick.

Width 12" | Height 34.5" | Depth 24"

1 door base cabinet that has a half depth adjustable shelf and 1 drawer.

*Please note that new cabinet inventory (hinged on either the left or right), is going to be replacing the current 'universal' cabinet inventory. During this transition period, if a Left or Right option for this cabinet is selected, but not yet available, you will receive one of the universal bases, which can be hinged either Left or Right, after delivery, on site.*

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 96" | Height 1-21/32" | Depth .25

Batten molding that comes in 8 ft long sections and is 0.25" thick.

Width 12" | Height 34.5" | Depth 24"

Spice rack base cabinet with a 8-7/8" opening and a full height door. The cabinet has 3 fixed shelves and side-mounted, ball-bearing glides. Please note the interior of the pullout will be in a natural finish.