Vienna Timber

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 96" | Height .25" | Depth .75"

Simple scribe molding.

Width 96" | Height 6" | Depth .75"

Molding extension that is used with starter molding (SKU: STRM-8) to make it easier to install molding on the tops of cabinets. The molding extension can be used without the starter molding, but it would first need a cleat support installed on site.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x30 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 3" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x36 regular filler (which must be purchased separately). Actual filler width is 2-1/2"

Width 2.5" | Height " | Depth .75"

Overlay filler to be used with a 3x42 regular filler (which must be purchased separately). Actual filler width is 2-1/2"