Vienna Timber

Width 6" | Height 30" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 5 cubes that will have finished interiors.

Width 6" | Height 36" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 6 cubes that will have finished interiors.

Width 6" | Height 42" | Depth 12"

Wine cube cabinet made of veneer plywood with wood edge banding. There are 7 cubes that will have finished interiors.

Width 6" |Height 30" |Depth 24"

Spice pull out to be used with a 6x30 filler (sold separately - see SKU WF630). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 6" filler (SKU WF630) must be ordered separately. An additional overlay or decorative filler can be installed on the 6" filler if desired (also sold separately).

Width 6" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 6" | Height 36" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 6" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 6" | Height 34.5" | Depth 24"

Appliance end panel with a 6" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 54" | Height 12" | Depth .75"

Arched raised panel valance that can be trimmed up to 3" on each side.

Width 54" | Height 5.5" | Depth .75"

Arched valance. The width of the flat section on either side of the arch is 6" and it can be trimmed up to 3" on each side.

Width 54" | Height 2.5" | Depth 10"

Floating shelf that will include the mounting brackets and hardware. The weight limit is 15 lbs/linear foot as long as the proper installation instructions are followed (instructions will be included with the shelf).