Vienna Timber

Width 96" | Height 5.25" | Depth .625"

Base board molding. Please note this base molding is slightly taller to account for uneven flooring and may need to have the height cut if needed, on site.

Width 96" | Height .75" | Depth 1.5"

Light rail molding, overall depth is 1-1/2", the flat part that will install under the wall cabinets is 3/4" deep. The lip that will extend over the front of the wall cabinet is 1/4" high.

Width 96" | Height .75" | Depth 1.5"

Starter molding that is installed above wall and tall cabinets which acts as a cleat for a molding extension (SKU: MEX-8), to make it easier to mount moldings on top of the cabinets. The starter molding and molding extension are ideal to use when mounting crown molding all the way to the ceiling.

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 30" | Height 34.5" | Depth 24"

Base microwave cabinet with (1) 9" high drawer on bottom. Opening will be 24"W x 12-1/2"H. It can be widened on site up to 28" W x 19"H, if needed. The space from the shelf to the top of the cabinet is 20".

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 30" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 1 drawer.

Width 30" | Height 24" | Depth 24"

Wall cabinet that has 2 doors and 1 shelf.

Width 96" | Height .75" | Depth .75"

Outside corner molding. Inside height and depth is 5/8".

Width 30" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 1 false drawer front. This cabinet will have no shelves.

Width 96" | Height .75" | Depth .75"

Inside corner molding.

Width 96" | Height 4.5" | Depth .25"

Toe kick made of MDF.