Vienna Timber

Width 3" | Height 34.5" | Depth 24"

Appliance end panel with a 3" stile on the front. Can be trimmed down to 1" wide if necessary. Panel is 1/2" thick plywood.

Width 3" | Height 96" | Depth .75"

Tall filler. The 2 long sides of the filler will be finished.

Width 48" | Height 96" | Depth .75"

Back panel that is made of 3/4" thick plywood. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 3" | Height 42" | Depth .75"

Wall filler. Both long sides of the filler are finished.

Width 3" | Height 36.5" | Depth 3"

Decorative post. The top smooth portion is 4" high and the bottom smooth portion is 6" high.

Width 3" | Height 34.5" | Depth 24"

Base column that can be trimmed on site if needed.

Width 48" | Height 96" | Depth .25"

Back panel that is made of 1/4" thick MDF. Only 1 side will be finished, all edges and opposite side will be unfinished.

Width 3" | Height 30" | Depth .75"

Filler, with both long edges finished.

Width 17" | Height 18" | Depth 12"

Appliance garage with a front width of 17". It will have a roll up, tambour door and is designed to fit under a 24x24 diagonal corner wall cabinet. The door opening is approximately 14" wide, the tambour door is partially inserted into the frame on either side.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet with 1 three quarter depth adjustable shelf and 2 drawers. This cabinet will have a 2-5/8" center stile.

Width 48" | Height 34.5" | Depth 24"

1 door blind base corner cabinet with 1 drawer and 1 shelf. This cabinet can be placed all the way in the corner (without any pull) so it would take up 48" of wall space. It can be pulled a max of 3", taking up 51" of wall space. The door width is 21-1/4", the stile width is 7-3/8" and the blind opening width is 18-3/4". A filler must be used between the blind and the adjacent cabinet so the doors and drawers are able to open without interference. The filler must be purchased separately.

Width 3" |Height 30" |Depth 24"

Spice pull out to be used with a 3x30 filler (sold separately - see SKU WF330). It comes with chrome rails and full extension, ball bearing glides (not soft-close). It will have 3 adjustable shelves and is constructed of UV coated maple wood. The pullout must be installed between 2 cabinets and the 3" filler (SKU WF330) must be ordered separately. An additional overlay or decorative filler can be installed on the 3" filler if desired (also sold separately).